RouterEntry · Sources checked · How we write our guides
PredictWind documents 10.10.10.1 as the DataHub’s local default address. Connect to the current DataHub Wi-Fi—factory name PW-Hub-XXXX—or its LAN, and use a changed local LAN address when configured. The upstream WAN DHCP address is a separate interface and does not prove the local default changed.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Connect to the DataHub itself
Join the current DataHub wireless network or connect a computer to LAN under the normal profile, then open the documented HTTP action above. Preserve any customized port/profile arrangement and use the current local LAN address after changes.
Do not make an upstream DHCP list the universal remedy for direct Wi-Fi access: a WAN-assigned address belongs to a separate interface.
Use the current local admin password
The documented unchanged initial login is admin / admin. Use the current administrator password after changes. Firmware 4.52 adds a stronger policy for new passwords; it does not establish a different universal factory pair. DataHub admin, Wi-Fi and PredictWind cloud credentials are separate.
Read the firmware version at the lower right of the landing page. Do not click Download or Confirm, install a profile, enable tracking or enable remote access merely to inspect it.
If 10.10.10.1 does not open
Reconnect to the actual DataHub network, enter the address directly in the browser’s address bar and try another browser or device. Use the current local address and administrator password.
Do not alter a customized profile, disconnect working equipment or search only an upstream WAN lease list to force the local route.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path