192.168.1.1Router login, made simple.
Open your router settings, change your Wi-Fi password, and get your network running your way. Start with the login below.
192.168.1.1Opens http://192.168.1.1 in a new tab
Log in to 192.168.1.1
You don’t need to be a networking expert. Here’s how to get in.
Connect to your network
Join your router’s main Wi-Fi network or connect an Ethernet cable. Guest networks may block router settings.
Open the login page
Type http://192.168.1.1 in your browser’s address bar, or use the login button above.
Enter your admin details
Use the router admin password you set, or check the device label or model manual for first-time login instructions.
192.168.l.l and 192.168.1.l aren’t valid IPv4 addresses.Can’t reach your router?
Choose what you’re seeing. Let’s get you to the right next step.
Answer a few questions to find the right next step.
The page won’t load or keeps timing out
Check that you’re on the router’s main network. Then look up your actual default gateway: it may be 192.168.0.1 or a different address. Type the full address into your browser instead of a search box.
If a VPN is active, check its local-network access setting. Try another browser or an Ethernet connection. Keep your firewall on.
My username or password isn’t working
Your admin password can be different from your Wi-Fi password. Check the router label, your saved passwords, and the exact model’s manual. If you changed it, factory defaults will no longer work.
Use the manufacturer’s recovery option if available. A factory reset is a last resort: it erases your network settings and may require your ISP’s setup details.
I’m on my phone and can’t connect
Join your router’s Wi-Fi rather than using mobile data or a hotspot. A guest Wi-Fi network may prevent admin access. If your phone switches to mobile data because the Wi-Fi has no internet, temporarily disable mobile data and try again.
My browser shows a security warning
Confirm the address matches the router’s gateway and that you are on your own trusted network. Local router pages may use an untrusted certificate. Check your model’s official instructions before proceeding; don’t bypass a warning on an unfamiliar address.
What’s the default username and password?
An IP address doesn’t determine a password. The right login depends on your router model, firmware, and any changes made during setup.
| Router / setup | Username | Admin password |
|---|---|---|
| Older TP-Link models | admin | admin (model dependent) |
| Many NETGEAR routers | admin | password (if unchanged) |
| Newer / ISP-provided routers | Check label or manual | Unique password or created at setup |
These are examples, not universal logins. Confirm your model’s documentation and change an unchanged default after signing in.
Find help for your router brand
Login addresses and settings differ. Get the instructions that fit your router.
What is 192.168.1.1?
192.168.1.1 is a private IPv4 address that some home routers use for their local management page. If it is your network’s gateway, opening it lets you reach the router’s sign-in screen.
It isn’t a public website or your public internet address. Different homes can use the same private address. Your router may use another address, and this page cannot automatically identify your gateway.
Not sure which IP your router uses?
Check the gateway on a device connected to your router. It’s more reliable than guessing.
Windows: open Command Prompt, run ipconfig, and find Default Gateway under your active connection.
Mac: open System Settings → Network → your connection → Details → TCP/IP. Read the Router field.
iPhone / iPad: open Settings → Wi-Fi → the information button beside your network. Look for Router. Android: open your connected Wi-Fi network’s details and look for Gateway or Router; labels vary by device.
A few more things you might be wondering
Is 192.168.1.1 the same as 192.168.l.l?
No. An IPv4 address contains numbers and dots. Use 192.168.1.1, with the number 1 in both final positions. The version with a lowercase letter l is a common typing mistake.
Do I need an internet connection to log in?
Usually no. You need a working connection to the router’s own Wi-Fi or Ethernet network. Some app-managed systems may need internet access for cloud account features.
Can I change my Wi-Fi password here?
RouterEntry helps you reach your router. After you log in there, look for Wireless, Wi-Fi, or Security settings. Save the new Wi-Fi password, then reconnect your devices. Some systems manage this through their official app.
Why does 192.168.1.1 open the wrong device?
A modem, router, or another local device may use this address. If you have more than one router, your active gateway might be a different device. Check the address in your network settings and match it with the equipment you want to manage.
Should I reset my router if I can’t log in?
Try the correct gateway, your saved admin password, and the manufacturer’s recovery steps first. A restart and a factory reset are different. A factory reset removes settings, including custom Wi-Fi details, and may interrupt internet service until you set it up again.
TP-Link support NETGEAR support IANA private address registry TP-Link: find your gateway Apple network settings
Help for your internet provider
Choose the exact equipment you use at home.
Help improve this guide
Found an incorrect step or a missing model? Send a correction or suggestion.
Open feedback form (English) ↗