RouterEntry · Sources checked · How we write our guides
GENEREX documents 10.10.10.10 as the CS141’s hardcoded configuration-mode address, not a universal operating-mode default. Prefer the HTTPS action below only when this device currently uses that address and HTTPS on port 443 is enabled. Its installed static or DHCP address, enabled protocol, custom port and current account take precedence.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Confirm configuration mode and service
Confirm the exact CS141 context and that the device currently uses 10.10.10.10 before opening the HTTPS action above. GENEREX documents HTTP port 80, HTTPS port 443, custom ports and optional Force HTTPS; use the protocol and port actually enabled by its administrator.
Normal operating mode can use a different static or DHCP address. Do not change device mode, networking or web-service controls merely to force the configuration-mode route.
Use the current enabled account
The unchanged admin / cs141-snmp pair applies only through firmware 2.22. Firmware 2.24 and later creates a personal administrator password. Use a current authorized enabled account; do not assume guest or anonymous access.
Read System → About for hardware/firmware information or use permitted UPS monitoring without changing configuration or outputs. Stop if initialization is unexpectedly required; do not create credentials merely for this status check.
If the configuration-mode address fails
Check the CS141’s actual mode, current static/DHCP address, enabled HTTP/HTTPS service, custom port, firmware generation and authorized account. An operating device need not answer at 10.10.10.10.
Use the administrator’s current records. Do not reset or flash the CS141, switch modes, alter UPS outputs or enable anonymous access simply to make this address respond.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
GENEREX: Webserver GENEREX: Data backup and firmware update GENEREX: User Management