RouterEntry · Sources checked · How we write our guides
HooToo documents 10.10.10.252 as the local default for the exact HT-ND001 Dual Band AC1200 Router. Connect through its LAN or current own Wi-Fi and use the installed current address and credentials after changes. Do not generalize this route to TripMate or RAVPower models.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Use the local HT-ND001 route
Connect to the exact router’s LAN or current Wi-Fi, then open the documented HTTP action above. DHCP is enabled by default for local clients, but a changed LAN address or operating mode takes precedence.
The manual’s port 8080 setting concerns remote WAN access, not this local URL. Do not enable remote management or append that port for the local status task.
Use the current administrator login
The factory table gives username admin and the case-sensitive password admin when unchanged. Use the current credentials after configuration. These are router-administration credentials, not necessarily the Wi-Fi password.
Open Status → System Status to read version, uptime and client count, or LAN Status to read the current local IP. No reset, Apply or network change is required.
If 10.10.10.252 does not open
Check the exact HT-ND001 identity, power/link indicators, current local connection, LAN address/subnet and current password. Try another browser if the local page fails to render.
Do not reset the router or copy unrelated MTU, WAN or remote-management changes merely to restore the default local route.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
HooToo HT-ND001 Online Guide