RouterEntry · Sources checked · How we write our guides
Televes documents 172.16.0.1 as the default management address for its exact Data Over Coax Gateway reference 769301. Connect directly through the device’s Ethernet port or its current local Wi-Fi; an installed unit’s current management address, credentials and AP Bridge/router mode take precedence beside the HTTP action below.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Use the direct local connection
Connect directly through the gateway’s Ethernet port or its current local wireless network, then open the documented HTTP address above. This route does not require discovering the device in an upstream router’s DHCP list.
Preserve the installed coax-provider configuration and current AP Bridge or router mode. Do not switch modes, reconfigure coax service or reset the gateway simply to reach the interface.
Keep web and Wi-Fi credentials distinct
The documented unchanged initial web login is case-sensitive Admin / Televes1. The initial CoaxData-DoC-Wifi network also uses Televes1, but the Wi-Fi and local-web roles are separate; use the current value for each after owner changes.
Read Device Information for hardware/firmware details or Network Information for the current mode. No Save action is required for viewing.
If 172.16.0.1 is unavailable
Confirm the exact Televes 769301 gateway, direct Ethernet or current local-Wi-Fi connection, compatible client addressing and the installation’s current management IP. Use the current configured credentials.
Ask the installer or coax-service administrator for the existing management path. Do not reset the gateway, change modes or alter provider/coax settings merely to restore the documented default.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
Televes Data Over Coax Gateway 769301 Manual