RouterEntry · Sources checked · How we write our guides
Applies to: DFI ICX610-C621A variants 770-ICX6101-000G and 770-ICX6101-400G with IPMI, using the BMC Web Setup User Guide dated September 4, 2023. Other variants and DFI boards are outside this scope.
On your authorised management network, enter 192.168.0.104 in the browser address bar only if LAN3 still uses its documented default. The guide does not specify a scheme or port.
Use only on your own authorised device network. RouterEntry does not access devices or collect passwords.
Confirm the BMC channel
The dedicated LAN3 BMC default is 192.168.0.104. DHCP or static configuration can change it. LAN1 and LAN2 have separate settings; confirm the installed channel and current address with the administrator.
Use the BMC login
The guide lists dfi for both the default user ID and password. Use the current authorised credentials if changed. These are BMC credentials, not Wi-Fi credentials.
Read the dashboard
Inspect System Dashboard for firmware and health information. Leave power, remote-control, configuration and firmware-update controls untouched.
If the default does not apply
Ask the responsible administrator for the current dedicated management address. Do not reset the board or change network settings to make this default respond.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
DFI ICX610-C621A product and IPMI ordering variants DFI BMC Web Setup User Guide, September 4, 2023