RouterEntry · Sources checked · How we write our guides
D-Link documents 192.168.0.200 as the factory static address for the DNH-100 Nuclias Connect Hub/controller. It is not a router, access point or DHCP fallback. A configured current address and password take precedence beside the HTTPS action below; port 8443 is the separate Device Access Port, not this login action.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Connect on the same subnet
Connect by Ethernet on a compatible local subnet, then open the documented HTTPS address above. Use the DNH-100’s current configured address on an installed system. Do not append port 8443: the manual assigns that separate port to device access rather than this controller login.
The sign-in page includes a CAPTCHA. Complete it yourself in the owner’s browser; RouterEntry does not log in, submit credentials or solve CAPTCHAs.
Use the current controller password
The documented unchanged initial login is admin / admin, followed by a mandatory password change after first login. An installed controller therefore uses its current password. These credentials are not a Wi-Fi key or access-point login.
For a read-only task, open System → About → System Information and inspect the controller status. Viewing that page does not require AP enrollment or configuration changes.
If the controller login fails
Confirm the exact DNH-100 identity, Ethernet link, same-subnet client address, current controller address and current password. The documented forgot-password flow depends on SMTP/email having been configured previously; do not promise email recovery when it was not.
Ask the installation administrator for the current management path or use local-access diagnostics. Do not reset the controller, change network settings or enroll APs merely to view an existing installation.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
D-Link DNH-100 Nuclias Connect User Manual v1.10 D-Link: connect to the DNH-100 through Ethernet