192.168.1.15 — TimeMachines TM1000A firmware and NTP request count

RouterEntry · Sources checked 2026-09-27 · How we write our guides

This follows the TM1000A manual version 3.3. The header check applies to firmware 2.6 and later on B-series hardware. The factory static address is 192.168.1.15; a configured static address or DHCP lease can differ.

Open TM1000A local configuration page

Use the current web password on the existing authorized local connection. The manual's initial password is tmachine; the illustrated login asks for a password only. Confirm the server's current address first.

Read the header

After login, note Firmware Version and NTP Lookups at the top of the configuration page. The counter increases for each client NTP request. This observation does not by itself verify time accuracy or successful synchronization.

If access fails

Ask the administrator to confirm the address, password and permitted subnet; the device can restrict HTTP access to its configured subnet. Leave network, timing, firmware and reset controls unchanged.

Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path