RouterEntry · Sources checked · How we write our guides
Optoma documents 192.168.100.10 as the WPS Pro presentation receiver’s default address. Upstream DHCP can change it; use the address currently displayed by the receiver. The ©2015 manual describes this exact model, not every Optoma projector or presentation device.
On the WPS Pro receiver’s network, enter its currently displayed IP address in your browser address bar. Use 192.168.100.10 only if that is still its address.
The manual’s browser workflow does not specify HTTP, HTTPS or a management port. Choose Admin and use the current credentials. The illustrated initial admin account/password is admin / admin; conference-control credentials and projection codes are separate.
Confirm the receiver’s displayed address
Join the matching WPS Pro receiver’s network and read its displayed IP address. The documented default is 192.168.100.10, but upstream DHCP can assign another address.
Enter the current displayed address in the browser. Confirm the receiver and network with the owner if the display and expected address differ.
Open Admin and inspect System Status
Choose Admin. The manual illustrates account admin with initial password admin; use changed credentials where configured. The documented initial conference-control password is moderator; current credentials may differ. Projection codes serve a separate role.
Open Admin → System Status to read model, firmware, IP address, subnet and gateway. Leave presentation and network settings unchanged.
If the browser page does not open
Reconfirm the receiver’s display, local network and current address, and ask the owner for current access details. A DHCP assignment can differ from the documented default.
Resetting, rebooting, downloading legacy software or disabling security is unnecessary for this status check. The legacy manual does not establish modern-browser compatibility or secure transport.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
Optoma WPS Pro manual, ©2015