RouterEntry · Sources checked · How we write our guides
Ruijie support documents 192.168.110.1 for the exact Reyee RG-EW1200G PRO. Initial conflict detection can move the router to 192.168.111.1, and installed settings can change it again. Reconnect to this router and use its current management address.
Use this HTTP address only for the matching RG-EW1200G PRO when it remains current. Conflict detection or later configuration can change the address; use the current management password.
Confirm this router and its current address
Join the RG-EW1200G PRO’s own SSID or connect directly by wire, then open the documented HTTP action above when 192.168.110.1 remains its address. If conflict detection moved it to 192.168.111.1, or the owner changed it, use that current address.
Check the displayed model and Wi-Fi identity so that you do not manage an upstream router. Do not repeatedly retry the old address or change WAN, mesh or operating mode.
Use the current management password
Use the current management password created for this installation. The reviewed initial-state flow can show a setup wizard without credentials, so no universal factory username or password is claimed. Management and Wi-Fi passwords can be configured alike but are not inherently interchangeable.
On an already configured router, use the home page to view Internet status and upstream and downstream traffic. Stop if a setup wizard appears; do not begin setup merely to inspect status.
If 192.168.110.1 does not respond
Confirm the exact RG-EW1200G PRO, its own local connection, current management address and current password. Check whether conflict detection moved the address to 192.168.111.1.
Do not reset, upgrade or alter WAN, mesh or mode settings simply to recover the earlier address.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path