RouterEntry · Sources checked · How we write our guides
Applies to: the HTI HT-H38 thermal imaging camera, Instruction Manual V1.1 dated April 11, 2024, in Wi-Fi Share mode. This address belongs to the camera-sharing procedure, not a general home-router login.
When connected to your own HT-H38 camera’s Wi-Fi Share network, enter 192.168.119.1 in the browser address bar. The manual does not specify HTTP, HTTPS or a port.
This is a local camera connection. RouterEntry does not open it, collect your password or receive camera images.
Confirm the camera and sharing network
Use these steps only for an HT-H38 whose Wi-Fi Share mode is already enabled. Its network name and joining password can be changed in Share settings, so use the current values for your camera. Do not assume a similarly named camera model follows this manual.
Enter the documented sharing view
After joining the camera network and entering the address, the manual describes a Start/Stop prompt. Select Start to enter sharing when that is your intended task. This is not a router-settings screen; no browser administrator username or password is specified by this procedure.
Keep this task limited to sharing
Use the official camera manual for recording, saved-file management or measurement settings. This page does not establish temperature accuracy or perform an equipment inspection. Do not send camera images or passwords through the RouterEntry feedback form.
If the sharing screen is unavailable
Recheck the exact model, the camera’s current Share network and your device’s Wi-Fi connection. Avoid trying unrelated router credentials or resetting equipment. For general local-access checks, continue to guided troubleshooting, or use the manufacturer’s manual below.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
HTI HT-H38 Instruction Manual V1.1 (April 11, 2024) HTI HT-H38 manufacturer product page and manual link