RouterEntry · Sources checked · How we write our guides
Applies to: H3C NX600 dual-band Wi-Fi 6 router, user manual 5W100. The default LAN address applies to normal router operation; a changed address or wireless-relay installation needs its current address.
On the NX600’s local LAN or Wi-Fi, enter 192.168.124.1 in the browser address bar if it still uses the default LAN address. The manual’s numeric instruction specifies no scheme or port.
Use only on your own authorised device network. RouterEntry does not access devices or collect passwords.
Use the current management password
Sign in with the configured management password. Initial setup can use the Wi-Fi password as the management password; a later management-password change can make them different. Do not assume a universal factory password.
Open basic information
In the professional interface, open 系统监控 → 运行信息 → 基本信息 (System Monitoring → Operating Information → Basic Information). Read the software version, uptime, port state and WAN connection information. Leave configuration and update controls unchanged.
If the default address does not fit
Use the current LAN address if it was changed. In wireless-relay mode, use the address assigned by the upstream router, available through the H3C app or upstream router’s device list. Do not reset or switch modes just to use this address.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
H3C NX600 user manual 5W100 — main text