RouterEntry · Sources checked · How we write our guides
Baicells documents 192.168.150.1/24 for the local MGMT interface of the Nova436Q Outdoor 4x1W Two-Carrier TDD eNodeB. Match this exact hardware label: it is an LTE base station, not a home router, CPE, legacy Nova-436 or Nova436H. The installed current MGMT address takes precedence beside the HTTP action below.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Use the static MGMT interface
Connect a maintenance computer to the MGMT interface and assign it an unused compatible static client address, then open the documented HTTP action above. Preserve and restore the computer’s prior settings.
The separate DATA interface uses DHCP by default. That DATA lease does not change the static MGMT route and does not make 192.168.150.1 the base station’s public or upstream gateway.
Use current management credentials
The documented unchanged factory login is admin / admin. Use the current installed management credentials after changes. No HTTPS or custom browser port is established in the cited exact-model guidance.
On the home page, open Basic Setting → Basic Info and read current eNB status. Do not substitute the legacy Nova-436 BTS Info route or change operating mode, radio, licensed-carrier, firmware or service settings.
If 192.168.150.1 does not open
Confirm the exact Nova436Q, management-interface connection, actual current MGMT address and matching client subnet. Use a unique client address distinct from the device and the current installed credentials.
Consult upstream leases only when intentionally investigating an actually connected DATA interface. Do not assume DATA DHCP changes MGMT, or reset, reboot or change modes simply to restore the factory maintenance address.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
Baicells Nova436Q Installation Guide, 2023 Baicells Nova436Q Installation Guide, 2022