RouterEntry · Sources checked · How we write our guides
Applies to: G&G Controls Telemetrix panels covered by its current-generation installer guide. This is the panel router’s setup route, not a general home-router default. Use only as the authorised installer of an already safely powered panel.
Use only on the authorised panel network. RouterEntry does not access equipment or collect passwords.
Join the panel network
Allow the panel router five to ten minutes to start. Join TELEMETRIX T-xxxxxx using the panel Wi-Fi password supplied on its label. Obtain that information through the site’s authorised installer; this guide does not cover opening or wiring the electrical enclosure.
Connect site Wi-Fi
Open the setup address above, select the site’s Wi-Fi network, enter that network’s password and choose connect. Allow two minutes for the router to restart. The site Wi-Fi password is separate from the panel-network password.
If the connection stalls
If no networks appear, allow the full ten-minute startup and reconnect to the panel Wi-Fi. A guest network requiring captive-portal sign-in is unsuitable. For remaining faults or alert delivery, use G&G Controls’ support guidance; do not operate pumps or change electrical controls to test this connection.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
G&G Controls — How to set up a Telemetrix panel