RouterEntry · Sources checked · How we write our guides
This is the LHG LTE18 kit (LHGGM&EG18-EA) documented initial LAN address. Use the current address and enabled management protocol after configuration changes; it is not every MikroTik model’s default.
For the matching initial LAN setup, connect through the PoE injector’s DATA connection using automatic IP assignment. Use the current router account; the model specifies initial admin and the device-label password, replaced during setup.
Use the current local login
Confirm the exact kit and existing LAN address. Follow configured HTTPS if enabled; it is not promised initially. The model’s label-password instructions take precedence over generic RouterOS blank-password examples.
Read Resources
In System → Resources, note Version and Uptime. WebFig skins or installed versions can change menu labels. Reading these values does not install an update. Stop if the account requires setup changes before viewing status.
If WebFig does not open
Check the DATA connection and assigned address, then ask the administrator to identify the router through LAN-side WinBox MAC access. Internet-side access is blocked by default. Do not reset, upload firmware or change cellular settings for this check.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
MikroTik LHG LTE18 kit manual MikroTik RouterOS Resource MikroTik RouterOS WebFig