RouterEntry · Sources checked · How we write our guides

This follows the BNET-2310M manual V1.10 dated September 1, 2026. 192.168.255.1 is its documented Ethernet default; use the current configured address if changed. The manual edition does not identify the firmware installed on your module.

Open BNET-2310M web interface

Use the current authorized account. The documented initial username and password are admin / admin, only if unchanged.

Confirm the existing local connection

Have the operator confirm the module's current address and your existing client network. An illuminated orange LAN indicator shows the Ethernet connection to a switch.

Read Firmware Version

Open System Information and read Firmware Version. Leave Account Management, Reboot Module and Module Setting controls unchanged.

If the page does not open

Ask the operator to check the current address, account and local network. Do not use the INIT or firmware pins, reset the module or change its I/O settings for this inspection.

Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path

Sources & further reading
ICP DAS BNET-2310M User's Manual V1.10, 2026/09/01