RouterEntry · Sources checked · How we write our guides
NavigateWorx documents 192.168.5.1 for the NR500 NC family: NR500-SNC has two Ethernet ports and NR500-PNC has four. Use ETH1, or the ETH1–ETH3 LAN bridge where those ports exist, and exclude ETH0 in the documented default setup. The HTTP action below composes the manual’s address and HTTP-service facts; use it only when HTTP is enabled at its current port, otherwise use the installed protocol and port.
Use this local link only when it matches your own equipment and network. RouterEntry does not detect your gateway or collect passwords.
Connect through the documented LAN
Connect the computer to ETH1, or the ETH1–ETH3 LAN bridge on a variant that has those ports. Do not use ETH0 for this documented default local route. The LAN DHCP server is enabled initially, so the computer normally receives a compatible address from this router.
Do not make an upstream-router lease list the default discovery step: in this arrangement the NR500 supplies the client address. The manual documents configurable HTTP port 80, HTTPS port 443 and local-service switches without conclusively establishing which factory checkboxes are enabled. Open the HTTP action only when it matches the enabled current service; otherwise use the installed protocol and port.
Use the current local credentials
The documented unchanged initial login is admin / admin. Use the current configured credentials on an installed unit. These are local router-administration credentials, not Wi-Fi, SIM or provider-account credentials.
For a read-only check, open Overview → Status and view the model, firmware and uptime. No service, remote-access or network setting needs to be changed.
If 192.168.5.1 does not open
Confirm the exact NR500-SNC or NR500-PNC variant, use an available LAN port other than ETH0 and check that the computer has compatible 192.168.5.x addressing. Use the installation’s current address, protocol, port and credentials.
Continue with local-access diagnostics. Do not enable remote access, reset the router or alter HTTP/HTTPS services merely to make the default route respond.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
NavigateWorx NR500 NC Family User Manual