RouterEntry · Sources checked · How we write our guides
Applies to: the LumenRadio MiraOS Starter Kit and its documented Raspberry Pi demo network. This check assumes the kit is powered and its sensors are already prepared. It is not a general Raspberry Pi, Grafana or home-router address.
On the kit’s demo Wi-Fi, type 192.168.91.1 in the browser address bar. The startup guide supplies no scheme or port.
Use only on your own authorised device network. RouterEntry does not access devices or collect passwords.
Join the demo network
The documented Wi-Fi name is mira_demo and its Wi-Fi password is demo_mira. Use the kit’s current authorised connection details if its owner has changed them.
Open MiraDemo
The documented Grafana demo sign-in is admin for both username and password. This is separate from the Wi-Fi password and applies only to this starter-kit setup; use the current dashboard credentials if changed. Select Home, then MiraDemo at the top left.
Read the active sensors
The guide gives an average sensor join time of one to three minutes, with some sensors taking longer. Refresh the browser to update the active sensors, then inspect their real-time data. If the demo remains unavailable, use the linked kit guide or ask its maintainer to check the existing setup; do not reset or reconfigure the kit for this reading check.
Browse documented IP addresses · Find your exact equipment · Choose a troubleshooting path
LumenRadio — MiraOS Starter Kit startup guide